V. Braic, C. N. Zoita, M. Balaceanu, A. Kiss, A. Vladescu, A. Popescu, M. Braic, TiAlN/TiAlZrN multilayered hard coatings for enhanced performance of HSS drilling tools, Surf. Coat. Technol., 204 (2010) 1925-1928.

 

Title: TiAlN/TiAlZrN multilayered hard coatings for enhanced performance of HSS drilling to

Abstract:  Alternate TiAlN/TiAlZrN multilayered hard coatings with bilayer periods ranging from 6.7 to 600 nm were prepared by cathodic arc method on steel substrates and 8 mm HSS drills. The elemental composition of the composing layers was determined. A thoroughly investigation of the characteristics of multilayers and of the TiN, TiAlN and TiAlZrN single layer coatings was done, concerning the phase composition, texture, microhardness, adhesion and dry drilling performance. The highest microhardness values, of about 49 GPa, were measured for the multilayers with Lambda approximate to 13 nm, while the coatings with large Lambda values (similar to 600 nm) were found to have the best adhesion (critical load L(c) = 63 N). The dry drilling tests revealed that the nanometer scale multilayered TiAlN/TiAlZrN coatings exhibited superior drilling performance as compared with commonly used single layer coatings (TiN, TiAlN)

Key words: TiAlN/TiAIZrN; Superlattice coatings; Microstructural and mechanical characteristics; Dry drilling performance